User Manual

3.2 Remote control commands
751 GPD Titrino
127
*Parameter Tree part "Parameters for DOC, monitoring", continuation
à .Monitoring Monitoring
³ Ã .L10Output Assignment of output L10
³ ³ Ã .AssignOutput To type of limit violation meas,temp,all,none 3.2.2.48.
³ ³ Ã .Limit Assign output to violated limit upper, lower, any ditto
³ ³ Ã .Output Signal to be set on output L10 active, pulse ditto
³ Ã .L11Output as for output L10
³ Ã .L12Output as for output L10
³ Ã .L13Output as for output L10
³ ³
à .Presel Preselections
³ Ã .IReq Request of Id's after start id1, id1&2, all, OFF 3.2.2.26.
³ Ã .SReq Request of sample size after start value, unit, all, OFF ditto
³ Ã .LimSmplSize Limits for sample size 3.2.2.27
³ ³ Ã .Status Status of limit control ON, OFF ditto
³ ³ Ã .LoLim Lower limit 0.0...999 999 ditto
³ ³ Ã .UpLim Upper limit 0.0...999 999 ditto
³ Ã .RateDisp Display of drift during cond. ON, OFF 3.2.2.49.
³ Ã .ActPulse Output of a pulse ON, OFF 3.2.2.28.