User Manual

3.2. Remote control commands
751 GPD Titrino
124
*Parameter Tree part "Parameters for DOS"
à .DosPara Dosing parameters
³ Ã .Type Type of dosing volume, time, rate 3.2.2.52.
³ Ã .Volume Volume dosing
³ ³ Ã .Volume Volume 0...10...99 999.99 ditto
³ ³ Ã .DisType Second dosing criterion time, rate ditto
³ ³ Ã .Rate Rate 0.001...150, max. ditto
³ ³ Ã .Time Dosing time 1...100...999 999 ditto
³ Ã .Time Time dosing
³ ³ Ã .Time Dosing time 1...100...999 999 ditto
³ ³ Ã .DisType Second dosing criterion volume, rate ditto
³ ³ Ã .Rate Rate 0.001...150, max. ditto
³ ³ Ã .Volume Volume 0...10...99 999.99 ditto
³ Ã .Rate Rate dosing
³ ³ Ã .Rate Rate 0.001...150, max. ditto
³ ³ Ã .StopType Second dosing criterion volume, time ditto
³ ³ Ã .Time Dosing time 1...100...999 999 ditto
³ ³ Ã .Volume Volume 0...10...99 999.99 ditto
³ Ã .Pause Waiting time after start volume 0...999 999 3.2.2.53.
³ Ã .TDelta Time interv.for meas.acquisition 1...10...999 999 3.2.2.54.
³ Ã .DosUnit Selection of the dosing unit internal D0, external D1,
³ ³ external D2 3.2.2.17.
³ Ã .Temp Titration temperature -170.0...25.0...500.0 3.2.2.55.
³ ³
à .StopCond Stop conditions
³ Ã .VStopStop volume
³ ³ Ã .Type Type of stop volume abs., rel., OFF 3.2.2.20.
³ ³ Ã .V Volume for absolute stop volume 0...99.99...9999.99 ditto
³ ³ Ã .Factor Factor for relative stop volume 0...±999 999 ditto
³ Ã .FillRate Filling rate 0.01...150.0, max. 3.2.2.23.
³ ³
à .StatisticsStatistics
³ Ã .Status Status of statistics calculation ON, OFF 3.2.2.24.
³ Ã .MeanN No.of individual determinations 2...20 ditto
³ Ã .ResTab Result table
³ ³ Ã .Select original,delete n,delete all ditto
³ ³ Ã .DelN Deletion of individual results 1...20 ditto
³ ³
à .Monitoring Monitoring
³ Ã .MeasVal Monitoring of measured values
³ ³ Ã.MeasMode Measured value pH, U, Ipol, Upol, OFF 3.2.2.56.
³ ³ Ã.MeasInput Measuring input 1, 2, diff. ditto
³ ³ Ã.PCurrent Polarization current 0...1...±127 ditto
³ ³ Ã.PVoltage Polarization voltage 0...400...±1270 ditto
³ ³ Ã.PolElectrTest Test for polarized electrodes ON, OFF ditto
³ ³ Ã.pH Limits for monitoring of pH values
³ ³ ³ Ã.LowLim Lower limit -20.00...20.00 ditto
³ ³ ³ Ã.UpLim Upper limit -20.00...20.00 ditto
³ ³ Ã.U Limits for monitoring of U values
³ ³ ³ Ã.LowLim Lower limit -2000...2000 ditto
³ ³ ³ Ã.UpLim Upper limit -2000...2000 ditto
³ ³ Ã.Ipol Limits for monitoring of Ipol values
³ ³ ³ : as for U
³ ³ Ã.U Limits for monitoring of Upol values
³ ³ ³ : as above
³ ³ Ã.Action Action if out of limits end, hold, wait, none ditto