User Manual

3.2. Remote control commands
751 GPD Titrino
122
*Parameter Tree part "Parameters for STAT"
à .CtrlPara Control parameters
³ Ã .EP Measuring point depends on meas.quant. 3.2.2.36.
³ Ã .UnitEp Unit of endpoint read only ditto
³ Ã .Dyn Dynamics depends on meas.quant. 3.2.2.37.
³ Ã .UnitDyn Unit of dynamics read only ditto
³ Ã .MaxRate Maximum dosing rate 0.01...10...150, max. ditto
³ Ã .MinRate Minimum dosing rate 0.01...25.0...9999 3.2.2.40.
³ ³
à .TitrPara Titration parameters
³ Ã .StartVStart volume
³ ³ Ã .Type Type of start volume abs., rel., OFF 3.2.2.15.
³ ³ Ã .V Volume for absolute start volume 0...999.99 ditto
³ ³ Ã .Factor Factor for relative start volume 0...±999 999 ditto
³ ³ Ã .Rate Dispensing rate for start volume 0.01...150.0, max. ditto
³ Ã .Pause Waiting time after start volume 0...999 999 3.2.2.16.
³ Ã .Tstart Start time 0...999 999 3.2.2.41.
³ Ã .StartMeas Start measuring value depends on meas.quant. ditto
³ Ã .RateStart Start rate 0.01...150, OFF ditto
³ Ã .TDelta Time interv.for meas.acquisition 1...2...999 999 3.2.2.34.
³ Ã .Direction Titration direction +, -, auto 3.2.2.31.
³ Ã .DosUnit Selection of the dosing unit internal D0, external D1,
³ ³ external D2 3.2.2.17.
³ Ã .MeasInput Measuring input 1, 2, diff. 3.2.2.18.
³ Ã .Ipol Polarization current 0...1...±127 ditto
³ Ã .Upol Polarization voltage 0...400...±1270 ditto
³ Ã .PolElectrTest Test for polarized electrodes ON, OFF ditto
³ Ã .Temp Titration temperature -170.0...25.0...500.0 3.2.2.19.
³ ³
à .StopCond Stop conditions
³ Ã .TStopStop time
³ ³ Ã .Type Type of stop time abs.,rel.,delta,delay,OFF 3.2.2.42.
³ ³ Ã .Time Time for absolute stop time 0...999 999 ditto
³ ³ Ã .Factor Factor for relative stop time 0...±999 999 ditto
³ ³ Ã .Delta Time after EP is once reached 0...999 999 ditto
³ ³ Ã .Delay Time after last dosing step 0...999 999 ditto
³ Ã .VStopStop volume
³ ³ Ã .Type Type of stop volume abs., rel., OFF 3.2.2.20.
³ ³ Ã .V Volume for absolute stop volume 0...99.99...9999.99 ditto
³ ³ Ã .Factor Factor for relative stop volume 0...±999 999 ditto
³ Ã .RateStop Stop rate 0.01...150.0, OFF 3.2.2.43.
³ Ã .FillRate Filling rate 0.01...150.0, max. 3.2.2.23.
³ ³
à .StatisticsStatistics
³ Ã .Status Status of statistics calculation ON, OFF 3.2.2.24.
³ Ã .MeanN No. of individual determinations 2...20 ditto
³ Ã .ResTab Result table
³ ³ Ã .Select original,delete n,delete all ditto
³ ³ Ã .DelN Deletion of individual results 1...20 ditto
³ ³