User Manual

3.2 Remote control commands
751 GPD Titrino
119
*Parameter Tree part "Parameters for MET"
à .TitrPara Titration parameters
³ Ã .VStepVolume increment 0...0.10...999.9 3.2.2.12.
³ Ã .DosRate Dispensing rate for increments 0.01...150.0, max. 3.2.2.13.
³ Ã .SignalDrift Drift for meas. value acquisition depends on meas.quant. 3.2.2.14.
³ Ã .UnitSigDrift Unit of measured value drift read only ditto
³ Ã .EquTime Equilibrium time 0...26...9999, OFF ditto
³ Ã .StartV Start volume
³ ³ Ã .Type Type of start volume abs., rel., OFF 3.2.2.15.
³ ³ Ã .V Volume for absolute start volume 0...999.99 ditto
³ ³ Ã .Factor Factor for relative start volume 0...±999 999 ditto
³ ³ Ã .Rate Dispensing rate for start volume 0.01...150.0, max. ditto
³ Ã .Pause Waiting time 0...999 999 3.2.2.1.
³ Ã .DosUnit Selection of the dosing unit internal D0, external D1,
³ ³ external D2 3.2.2.17.
³ Ã .MeasInput Measuring input 1, 2, diff. 3.2.2.18.
³ Ã .Ipol Polarization current 0...1...±127 ditto
³ Ã .Upol Polarization voltage 0...400...±1270 ditto
³ Ã .PolElectrTest Test for polarized electrodes ON, OFF ditto
³ Ã .Temp Titration temperature -170.0...25.0...500.0 3.2.2.19.
³
à .StopCond Stop conditions
³ Ã .VStopStop volume
³ ³ Ã .Type Type of stop volume abs., rel., OFF 3.2.2.20.
³ ³ Ã .V Volume for absolute stop volume 0...99.99...9999.99 ditto
³ ³ Ã .Factor Factor for relative stop volume 0...±999 999 ditto
³ Ã .MeasStop Stop measured value pH, U, I depends on meas.quant. 3.2.2.21.
³ Ã .UnitMStop Unit of stop measured value read only ditto
³ Ã .EPStop Stop after a number of EP's 1...9, OFF 3.2.2.22.
³ Ã .FillRate Filling rate 0.01...150.0, max. 3.2.2.23.
³
à .StatisticsStatistics
³ Ã .Status Status of statistics calculation ON, OFF 3.2.2.24.
³ Ã .MeanN No. of individual determinations 2...20 ditto
³ Ã .ResTab Result table
³ ³ Ã .Select original,delete n,delete all ditto
³ ³ Ã .DelN Deletion of individual results 1...20 ditto
³
à .Evaluation Evaluation
³ Ã .EPC EP criterion depends on meas.quant. 3.2.2.25.
³ Ã .Recognition EP recognition
³ ³ Ã .Select Type of EP recognition all,greatest,last,window,OFF ditto
³ ³ Ã .Window Window
³ ³ ³ Ã .1 up to 9 windows
³ ³ ³ ³ Ã.LowLim Lower limit window 1 depends on meas.quant. ditto
³ ³ ³ ³ Ã.UpLim Upper limit window 1 depends on meas.quant. ditto
³ Ã .FixEP Fix endpoints
³ ³ Ã .1 up to 9 fix EP's
³ ³ ³ Ã.Value Measured value for fix EP1 depends on meas.quant. ditto
³ Ã .pK pK or HNP evaluation ON, OFF ditto
³
à .Presel Preselections
³ Ã .IReq Request of Id's after start id1, id1&2, all, OFF 3.2.2.26.
³ Ã .SReq Request of sample size after start value, unit, all, OFF ditto
³ Ã .LimSmplSize Limits for sample size 3.2.2.27
³ ³ Ã .Status Status of limit control ON, OFF ditto
³ ³ Ã .LoLim Lower limit 0.0...999 999 ditto
³ ³ Ã .UpLim Upper limit 0.0...999 999 ditto
³ Ã .ActPulse Output of a pulse ON, OFF 3.2.2.28.