User Manual
3.2 Remote control commands
751 GPD Titrino
117
&Mode
Object Description Input range Reference
& Root
à Mode Mode $G, $S, $H, $C 3.2.2.1.
: Ã .QuickMeas Rapid meas. in basic mode $G, $S 3.2.2.2.
à .Select Mode selection DET,MET,SET,KFT,STAT,DOS,
³ DOC,MEAS,CAL,TIP 3.2.2.3.
à .DETQuantity Measured quantity for DET pH, U, Ipol, Upol ditto
à .METQuantity Measured quantity for MET pH, U, Ipol, Upol ditto
à .SETQuantity Measured quantity for SET pH, U, Ipol, Upol ditto
à .MEASQuantity Measured quantity for MEAS pH, U, Ipol, Upol, T ditto
à .KFTQuantity Measured quantity for KFT Ipol, Upol ditto
à .STATQuantity Measured quantity for STAT pH, U, Ipol, Upol ditto
à .DOCQuantity Measured quantity for DOC pH, U, Ipol, Upol ditto
à .NameName of current method read only/read+write 3.2.2.4.
à .Parameter* Parameter of current mode, see below
³
à .Def Definitions for data output
³ Ã .Formulas Calculation formulas
³ ³ Ã .1 for result 1
³ ³ ³ Ã .Formula Calculation formula special 3.2.2.5.
³ ³ ³ Ã .TextRS Text for result output up to 8 ASCII char ditto
³ ³ ³ Ã .Decimal Number of decimal places 0...2...5 ditto
³ ³ ³ Ã .Unit Unit for result output up to 6 ASCII char ditto
³ ³ ³ Ã .Limits Limits for result ON, OFF ditto
³ ³ ³ Ã .LoLim Lower limit 0...±999 999 ditto
³ ³ ³ Ã .UpLim Upper limit 0...±999 999 ditto
³ ³ ³ Ã .Output Output on L13 active, pulse, OFF ditto
³ ³ ³ : up to 9 results
³ Ã .SiloCalc Silo calculations
³ ³ Ã .Assign Assignment
³ ³ ³ Ã .C24 Store as variable C24 RSX,EPX,CXX 3.2.2.6.
³ ³ ³ Ã .C25 Store as variable C25 RSX,EPX,CXX
³ ³ Ã .MatchId Matching of Id's id1, id1&2, all, OFF
³ Ã .ComVar Assignment of common variables
³ ³ Ã .C30 for C30 RSX,EPX,CXX,MNX 3.2.2.7.
³ ³ Ã up to C39
³ Ã .Report Reports at the end of determination
³ ³ Ã .Assign1 Output to COM1 special 3.2.2.8.
³ ³ Ã .Assign2 Output to COM 2 as COM1
³ Ã .Mean Assignment for mean calculation
³ ³ Ã .1 MN1
³ ³ ³ Ã .Assign Input of variable RSX, EPX, CXX 3.2.2.9.
³ ³ ³ :
³ Ã .TempVar Assignment of temporary variables
³ ³ Ã .C70 for C70 RSX,EPX,CXX 3.2.2.10.
³ ³ Ã up to C79
à .CFmla Calculation constants
³ Ã .1 Calculation constant C01
³ ³ Ã .Value Input of value 0...±999 999 3.2.2.11.
³ Ã up to C19