Manual

3 Operation
750 Autosampler
38
Summary of the remote control commands
Command Description
@GTV ###
@LDL #
@VLV LD/INJ
@RNP
@RVN
@RVP
@RDX
@RDY
@RDZ
@BZR $$$
@AUX 1 ON/OFF
@MSG ## "$$$"
@LOC
Go to vial position ### :
0 Rest position at left front
1 … 128 Vial position on sample tray
Fill sample loop:
The transfer needle is lowered to position # (1 … 4).
Switch injection valve:
LD LOAD (switch injection valve to FILL position)
INJ INJECT (switch injection valve to INJECT position)
Read needle position:
The position (1 … 4) is put out.
Read vial number:
The position (1 … 128; HOME) is put out.
Read injection valve position:
The position (LOAD, INJECT) is put out.
Read x position:
The x position (0…760) is put out.
Read y position:
The y position (0…1000) is put out.
Read z position:
The z position (0…46) is put out.
Trigger acoustic signal $$$:
CLK single short acoustic signal
ERR single long acoustic signal
ALM triple slow acoustic signal
PNC repeated slow acoustic signal
ON continuous signal
OFF switch off acoustic signal (PNC, ON)
Set contact closure 1 ("T1") on or off.
Display at position ## (1…80; 1…20 = 1
st
line; 21…40 = 2
nd
line;
41…60 = 3
rd
line; 61…80 = 4
th
line) on the LCD display the message
"$$$...".
Return to normal operation (LOCAL).
# = digit 0 … 9; $ = any character