Manual

2 Installation

750 Autosampler

2.3.2 Mains cable and mains connection

Mains cable

The instrument is supplied with one of three mains cables

• 6.2122.020 with plug SEV 12 (Switzerland, …)

• 6.2122.040 with plug CEE(7), VII (Germany, …)

• 6.2133.070 with plug NEMA 5-15 (USA, …)

which are three-cored and fitted with a plug with an earthing pin. If a

different plug has to be fitted, the yellow/green lead (IEC standard)

must be connected to protective earth (protection class 1).

Any break in the earthing inside or outside the instrument can make it

a hazard!

Mains connection

Plug the mains cable into mains connection plug 1414 of the 750 Auto-

sampler (see Fig. 5).

2.3.3 Switching the instrument on/off

The 750 Autosampler is switched on and off using mains switch 1313.

When the instrument is switched on display 11 lights up.