Owner manual

3.2 Remote control commands
748 DH Sample Changer
15
3.2.2.11 Assembly.GoToXYZ $G
Assembly.GoToXYZ.X 0...630
Assembly.GoToXYZ.Y 0...272
Assembly.GoToXYZ.Z 0...120
Assembly.GoToXYZ.SpeedXY 0...3...7
Assembly.GoToXYZ.SpeedZ 0...3...7
Moves to the predefined position. The above speeds are only valid for As-
sembly commands.
The extreme positions which are still in the moving range of the Sample
Changer are given in the corresponding rack definition file
(..\bin\PW74xDef\748*r.def of your TiNet program).
You may enter higher valuesfor X, Y, and Z but the Sample Changer has to be
reinitialized after being moved to a position out of ist moving range.
3.2.2.12 Assembly.PumpOn True, False, $G
&Assembly.Pump"True";$G Switching the pump on.
&Assembly.Pump"False";$G Switching the pump off.