Owner manual

8 Technical data
746 VA Trace Analyzer / 747 VA Stand
8-14
8.3.5 Handshake
The 746 VA Trace Analyzer offers the following possibilities to set the handshake
(see section 5.3.1):
No handshake (none)
The 746 VA Trace Analyzer neither checks handshake inputs (CTS, DSR, DCD) nor
sets handshake outputs (DTR, RTS).
Reduced hardware handshake (HWshort)
746 VA Trace Analyzer as receiver:
L
F
RTS
DTR
RxD
RTS
DTR
RxD
746 VA Trace Analyzer as sender:
L
F
RTS
CTS
TxD
RTS
CTS
TxD
DTR DTR
The data flow can be interrupted by deactivating the CTS line.
Full hardware handshake (HWfull)
All handshake inputs are checked, all handshake outputs are set.
746 VA Trace Analyzer as receiver:
L
F
RTS
DTR
RxD
RTS
DTR
RxD
Time
External device
746
Time
External device
Gerät
746
Time
External device
746