Owner manual

7 Safety, Errors, Troubleshooting, Diagnosis, GLP

746 VA Trace Analyzer / 747 VA Stand

7-32

Start overall initialization

After the RAM test, you are asked whether or not you wish to perform a

global, overall initialization:

-> reset all memory and hardware setup to default: y/n ?

<y> All data memories are cleared, all instrument parameters

are reset to their default value.

<n> Possibility to switch to the Reset with deletion of the work-

ing storage (see above) or to abort the overall initialization

(answer all subsequent inquiries also with <n>).

Testing the beep

The functioning of the beep can be tested by pressing <y>. Press <n> to

continue.

-> test beep: y/n ? n

The instrument is now powered up and the ”MONITORING” page appears.