Owner manual

5.7 Program instructions
746 VA Trace Analyzer / 747 VA Stand
5-310
VMIX Page: O, S Stand: A Abbreviation: VM
Instructions t/s Main parameters Auxiliary parameters
––––––––––––– ––––– ––––––––––––––––––––––––– –––––––––––––––––––––––––
## .. VMIX ..... Cycles ........ V.mix ........mL
Rack pos. ........
Function Mix solution at the specified rack position on the 695 Autosampler.
Parameter Range; Default value / Meaning
Cycles 1...5; 1
Number of mixing cycles
This parameter defines the number of times the solution located in the
position on the 695 Autosampler specified in the parameter Rack.pos.
should be mixed. A mixing cycle comprises the following:
– Siphoning off the volume V.mix from the vessel.
– Delivery of the volume V.mix into the same vessel.
Rack pos. SF, SA, A01...A44, B01...B44; SF
Rack position at which the solution should be mixed
This parameter defines the rack position at which the solution should
be mixed. The following positions can be entered:
SF Current sample vessel (FEED) on the sample rack
SA Current auxiliary vessel (AUX) on the sample rack
A01...A44 Position 1...44 on standard rack A
B01...B44 Position 1...44 on standard rack B
V.mix 0.010...10.000 mL; 1.000 mL
Mixing volume
Solution volume that is siphoned off per mixing cycle and then deliv-
ered.
Description The VMIX instruction is used to mix the solution of a vessel on the 695
Autosampler by siphoning off and subsequent delivery of a defined
mixing volume. The entire mixing cycle can run up to 5 times.
Comment Thorough mixing of a solution is achieved by multiple siphoning off and
delivery of only part of the solution.
Example see CSOLN/F