Owner manual

5.7 Program instructions

746 VA Trace Analyzer / 747 VA Stand

5-268

Comments • The RADD>M instruction must be used in both the recording of the

calibration curve and in the determination.

• For recording of the calibration curve, the RADD>M instruction must be

located within a CAL loop.

• On execution of the RADD>M instruction with a 685 Dosimat, a 700

Dosino or the 695 Autosampler, a wait is made until the addition is

complete before the instruction following RADD>M is executed.

Example see (CAL