Owner manual

5.7 Program instructions
746 VA Trace Analyzer / 747 VA Stand
5-182
• Instructions for 717 Sample Changer
Instruction Meaning Page Stand
LIFT Lift position for 717 Sample Changer O, S M
SHIFT Shift position for 717 Sample Changer O, S M
• Instructions for the remote interface
Instruction Meaning Page Stand
SCANCTRL Inquiry of input control lines 1...8 and program stop
until the test condition is met or the line time has
elapsed
O, S M, A
SETCTRL Setting output control lines 1...8 O, S M, A
• Instructions for RS232 interface and printer
Instruction Meaning Page Stand
SEND>RS1 Sending a message to RS interface 1 O, S M, A
SEND>RS2 Sending a message to RS interface 2 O, S M, A
PRINT Printout of a message O, S M, A
• Miscellaneous
Instruction Meaning Page Stand
SEGMENT Call-up of a segment O M, A
HOLD Program hold with output of a message O, S M, A
NOP Blank line without function (No Operation) O, S M, A
REM Remarks or comments line O, S M, A
END End of main program or segment O, S M, A
DSWEEP Voltage sweep without measured value recording
(Dummy Sweep)
O, S M, A
CONDC Electrochemical regeneration of carbon electrodes
(e.g. glassy carbon)
O, S M, A
BEEP Audio signal O, S M, A
SIMPULSE Simulation of standard additions with the 3.496.8380
Voltage Simulator
O, S M, A
SIMRESET Resetting of the 3.496.8380 Voltage Simulator O, S M, A