Owner manual

5.7.2 Overview of the program instructions
746 VA Trace Analyzer / 747 VA Stand
5-181
• Dispensing of standard addition solutions
Instruction Meaning Page Stand
ADD/M Standard addition solution is already in measuring
vessel (MEAS)
O, S M
ADD>M Dispense standard addition solution into measuring
vessel (MEAS)
O, S M, A
PADD>M Dispense standard addition solution proportional to
the measured evaluation value into measuring
vessel
O, S M, A
• Dispensing of calibration solutions
(calibration curve and internal standard)
Instruction Meaning Page Stand
CSOLN>M Dispense calibration solution into measuring vessel
(MEAS)
O, S M, A
CSOLN/M Calibration solution is already in measuring vessel
(MEAS)
O, S M
CSOLN/F Calibration solution is already in sample vessel
(FEED)
O, S A
RADD>M Dispense reference solution with internal standard
into measuring vessel (MEAS)
O, S M, A
RADD>F Dispense reference solution with internal standard
into sample vessel (FEED)
O, S A
• Instructions for 695 Autosampler
Instruction Meaning Page Stand
A>M Transfer solution from auxiliary vessel (AUX) to
measuring vessel (MEAS)
O, S A
F>M Transfer solution from sample vessel (FEED) to
measuring vessel (MEAS)
O, S A
F>A Transfer solution from sample vessel (FEED) to
auxiliary vessel (AUX)
O, S A
RINSE Rinse measuring vessel (MEAS) and reset volume
bookkeeping to "0"
O, S M, A
VMIX Mix solution in specified rack position O, S A
VWASH Additional rinsing of transfer tubing after solution
transfer to target vessel
O, S A