Owner manual

5.5 Operation

746 VA Trace Analyzer / 747 VA Stand

5-102

Parameter Range; Default value / Meaning

dU.rear display only

Voltage difference to rear base point

Absolute voltage difference determined between the base point at the

peak/wave rear half and the peak voltage U.peak or the half-wave

potential U/2 in mV.

S.front display only

Slope of baseline at front base point

Slope of the baseline determined at the base point at the peak/wave

front half.

With peaks with a baseline of the linear type, this parameter is not

shown.

S.rear display only

Slope of baseline at rear base point

Slope of the baseline determined at the base point at the peak/wave

front half.

With peaks with a baseline of the linear type, this parameter is not

shown.

linear, whole

dU.frontdU.rear

S.rear

S.front

S.rear

S.front

S.rear

linear, DCT

dU.frontdU.rear

expon., whole

dU.frontdU.rear

polynom, whole

dU.frontdU.rear