Owner manual

5.5.1 MONITORING

746 VA Trace Analyzer / 747 VA Stand

5-81

Parameter Range; Default value / Meaning

XXXXXXXX

--------

Method name XXXXXXXX is copied to the field Method.call.

Without entry of a stand number, the VA Stand set in the parameter

Stand address on the "MONITORING" page is used as default.

Without entry of the run mode, the program run mode set in the

parameter Run mode on the "MONITORING" page is used as default.

The automatic method call functions only when the specified method

is present in the working memory.

Sample size/S0 1.0...9999.9 uL...L / ug...kg; - L

Sample size

Entry of the sample size (variable S0) in this column as either a volume

or weight is mandatory, otherwise the determination can not be

started (error message Missing sample). Entry of an asterisk * is also

possible, but only

• if no concentrations or dispensed volumes based on S0 need be

calculated, or

• if the instruction SMPL/F is used with the 695 Autosampler with

subsequent solution transfer to the auxiliary or measuring vessel,

• if the instruction CSOLN>M or CSOLN/F for calibration solutions is

used with the 695 Autosampler.

You will find a detailed description of the Sample size/S0 parameter

in section 5.4.4 "SAMPLES".