Owner manual

5.3.2 STAND
746 VA Trace Analyzer / 747 VA Stand
5-33
Softkeys Meaning
Copy to
Data Cd.
Copy rack data to data card
The put in rack data are copied to the data card; the name entered
under Rack name is used as file name and automatically assigned the
extension aut.
Load
from 695
Load rack data from 695 Autosampler
The rack data stored in the 695 Autosampler for the rack selected
under Rack type are loaded into the working memory.
Data in the 695 Autosampler for the following sample and standard
racks as well as special positions are loaded as standard:
S01, S02, S03, S04, S05, S08, S10, S12, A01, B01
Homepos., Measpos., Washpos., Wastepo.
Store
to 695
Store rack data in 695 Autosampler
The put in rack data are permanently stored in the autosampler under
the address selected with Rack type.
To avoid inadvertent losses of the rack data stored in the Autosampler
as standard, we advise you to use the softkey <Copy to Data Cd.> to
make a backup copy on the data card of the following rack data:
S01, S02, S03, S04, S05, S08, S10, S12, A01, B01
Homepos., Measpos., Washpos., Wastepo.
Rack
param.
Modify rack parameters in header lines
Pressing this softkey allows modification of the parameters Rack
name, Rack type and V.sample max in succession. Below the header
lines, the window Rack definitions containing the rack types and
rack names stored on the 695 Autosampler is displayed.
Parameter Range; Default value / Meaning
Rack name 8 characters;
Rack name
Freely selectable name for rack. The name entered here will be used
as a file name and automatically given the extension .aut when
stored on the data card with <Copy to Data Cd.>.
Rack type S01...S31, A01...A07, B01...B07, Homepos., Measpos., Washpos.,
Wastepo.;
Rack type or special needle position
Selection of the rack type or the special needle position for the display
or entry of rack data:
Sample rack Sample holder Samples
S05 6.2041.060 – 80
S10 6.2041.070 – 40
S01 6.2041.100 1 × 6.2041.040 (left) 12
S02 6.2041.100 1 × 6.2041.040 (right) 12
S03 6.2041.100 2 × 6.2041.040 24
S04 6.2041.110 1 × 6.2041.050 (left) 16
S08 6.2041.110 1 × 6.2041.050 (right) 16
S12 6.2041.110 2 × 6.2041.050 32
A01 6.2041.080 – 16
B01 6.2041.090 – 10