Owner manual

5.1 The keys and their functions
746 VA Trace Analyzer / 747 VA Stand
5-7
5.1.4 Main function keys
The following 6 red and orange keys constitute the main function keys on the key-
pad of the 746 Trace Analyzer:
.
,
F1
FORM FEED
7
F2 F3 F4 F5 F6 F7 F8ESC
LINE FEED
PRINT STOP
START
(CONT)
8 9
4 5 6
321
0 .
-
)
BREAK
ABBREV
DELAY
STOP
HOLD
(STEP)
STAND
DOSIMATS
VA TRACE
ANALYZER
SOLUTIONS
METHODS
DETERMI-
NATIONS
DATA
CARD
SAMPLES
COMMON
VARIABLES
MONI-
TORING
RESULTS
CURVES DOCUMEN-
TATION
OP.
SEQUENCE
SEGMENTS CALCU-
LATION
STANCES
BACK
SPACE
INSERT
PG DN
HOME
DELETECLEAR
ENTERSHIFTSHIFTCAPS
SUB-
#@!Z X C V B N M < > ?
%
^
$PG UPA S D F G H J K L :
_
"
(*&Q W E R T Y U I O P +
PRINT
SCREEN
STORAGES OPERATION SPECIFICATIONS
METHOD
SET UP
;
'
=
-
/
These keys have the following meaning:
Key Meaning
START
(CONT)
Start = Program start
The program loaded in the working memory is started. The display
* BUSY * then appears on the "MONITORING" page instead of
* READY *. Starting the program with this key is possible from all dialog
pages with the exception of "STAND" and "CURVES".
(Cont) = Continue interrupted program
The program interrupted with <HOLD> is continued. The display
* BUSY * then appears on the "MONITORING" page instead of
* BUSY (HOLD) *.
BREAK
Immediate program stop
The active program or one interrupted with <HOLD> is immediately
stopped. The display * READY * then appears on the "MONITORING"
page instead of * BUSY * or * BUSY (HOLD) *.
Some functions with the 685 Dosimats, 700 Dosinos or 695 Autosam-
pler must be carried out completely before the program can be stopped
definitely. In this case, * BUSY (BREAK) * appears on the "MONITO-
RING" page.
Reset possibility
In the instrument standby mode (* READY *), you have the possibility to
initiate a normal reset through pressing this key (see section 7.3.3) and
responding to the subsequent inquiry Do you really want to reset ?
by pressing the <ENTER> key (abort by pressing <ESC>).
DELAY
STOP
Delayed program stop
The active program is run to completion for the current sample, but the
sample series is then stopped. Until the stop, the display * BUSY
(DSTOP) * appears on the "MONITORING" page followed by
* READY *. This key is of practical importance only for ongoing sample
series (Auto.batch = on).