Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index

4.7 Results
■■■■■■■■■■■■■■■■■■■■■■
90
■■■■■■■■
743 Rancimat
4
Change the font
■ Click on the menu item Format ▶ Fonts....
The following dialog window appears:
■ Carry out the required settings and confirm with [OK].
Selecting determinations
Proceed as follows to select one or more lines of the determination over-
view:
1
Select a line
■ Place the mouse button on the left edge of the line to be selec-
ted.
The cursor assumes the following form:
■ Click on the line.
2
Select several lines
■ Place the mouse button on the left edge of the line to be selec-
ted.
The cursor assumes the following form:
■ Keep the mouse button pressed down and move over the left
edge of all lines to be selected.