Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index

4.7 Results
■■■■■■■■■■■■■■■■■■■■■■
88
■■■■■■■■
743 Rancimat
Formatting the determination overview
Proceed as follows to format the determination overview.
A detailed description of the parameters can be found at "Parameter
description", page 95.
1
Select fields
■ Click on the symbol
or the menu item Format ▶ Select
fields.
The following dialog window appears:
Only those fields are shown in the determination overview which
are listed in the right column under Display.
■ In the column Selection, click on a field which is to be displayed
in the determination overview.
■ Click on the [>] button.
■ In the column Display, click on a field which is not to be dis-
played in the determination overview.
■ Click on the [<] button.
2
Adjust the column width
■ Click in any cell of the column whose width is to be adjusted.
■ Click on the menu item Format ▶ Adjust width.
The following dialog window appears: