Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Operation
743 Rancimat
￭￭￭￭￭￭￭￭
85
2
Adjust the parameters
￭ Adjust all required parameters (see Chapter 4.5.2.1, page 60).
￭ Confirm the changes with [OK].
4.6.7 Stopping the determination manually
Determinations are normally automatically stopped after reaching the stop
criteria defined in the method. Current determinations can also be stop-
ped manually.
1
Stop determination
￭ In the Control window, click on the button [Stop].
The message Do you want to save this determination? appears.
2
Save measured data and results
￭ Confirm the message with [Yes] to save all data of the determina-
tion.
￭ or confirm the message with [No] to reject all data.