Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Operation
743 Rancimat
￭￭￭￭￭￭￭￭
75
4.6 Determinations
Standard sequence Optional steps Further information
Prepare samples
Prepare instrument and accessories
Select method
Section 4.6.1
Section .4.6.2
Section 4.6.3
Modify method parameters
Section 4.5.2
Start heating
Enter sample identifiers
Temperature
reached?
no
yes
Insert and connect reaction vessels
Start determination
Section 4.6.3
Section 4.6.3
Section 4.6.3
Section 4.6.4
Stop crit.
reached?
no
yes
Modify live parameters
Stop determination manually
Section 4.6.6
Section 4.6.7
Determination finished
Automatic report output
Section 4.5.2.6
Result display
Clean vessels and accessories
Section 4.7
Section 4.6.5