Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index
4.5 Methods
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
68
￭￭￭￭￭￭￭￭
743 Rancimat
Time axis (x)
Selection
Auto scaling | Manual scaling
Auto scaling
Automatic definition of the start and end value of the time axis.
Manual scaling
Manual definition of the end value of the time axis.
End value
End value of the time axis with manual scaling.
Range
0.5 ... 100 h
Conductivity axis (y)
Selection
Auto scaling | Manual scaling
Auto scaling
Automatic definition of the start and end value of the conductivity axis.
Manual scaling
Manual definition of the end value of the conductivity axis.
End value
End value of the conductivity axis with manual scaling.
Range
10 ... 400 µS/cm