Owner's manual

4.5 Methods
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
58
￭￭￭￭￭￭￭￭
743 Rancimat
Renaming an existing method
Proceed as follows to rename an existing method:
Note
A method which is still selected in one of the blocks A or B, cannot be
renamed. Select another method first in order to rename the required
method.
1
Open Method manager
￭ In the Control window, click on the symbol
or the menu
item File ▶ Method manager....
The following dialog window appears:
2
Select and rename method
￭ Click on the required method and then the button [Rename].
The method name is highlighted in blue.
￭ Enter the new method name and click with the mouse on the free
white area below the method name in order to accept the
change.
￭ Click on the [Close] button.
Saving a method under a new name
Proceed as follows to save an existing method under a new name:
1
Open method
￭ In the Control window, click on the symbol
or the menu
item File ▶ Open method....
The dialog window Open method appears.
￭ Click on the required method and confirm the selection with
[Open].