Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index
4.5 Methods
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
56
￭￭￭￭￭￭￭￭
743 Rancimat
2
Adjust parameters
￭ Adjust the required parameters.
￭ Click on the tab Evaluation and also adjust the parameters.
￭ Repeat for all remaining tabs.
Note
You can find a detailed description of all tabs and their parameters
at 4.5.2 Parameter description.
3
Save method
￭ Click on the [Save as...] button.
The dialog window Save method as... opens.
￭ Enter the method name and confirm with [Save].