Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Operation
743 Rancimat
￭￭￭￭￭￭￭￭
47
￭ Click on the symbol or the menu item Filter ▶ Selection
based filter.
Only entries with the date "30.08.2006" are displayed in the dialog
window.
2
Remove the filter again
￭ Click on the symbol
or the menu item Filter ▶ Remove filter.
All entries are once again displayed in the dialog window.
Deleting entries from the event overview
Proceed as follows to delete certain entries from the event file:
1
Open dialog window
￭ In the Control window, click on the menu item
Options ▶ Event log….
The following dialog window appears:
2
Delete entries
￭ Enter the maximum age in days, which the entries are allowed to
have in the list. All older entries are deleted.
￭ Confirm the entry with [OK].
Meaning of the symbols and columns in the event overview
Type
- Information on correctly executed events.
- Indication of a special event.
- Error message for error event.
Date
Date of the event. The format depends on the settings defined in Win-
dows in Control Panel ▶ Country settings ▶ Date.