Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index
4.3 Program information
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
46
￭￭￭￭￭￭￭￭
743 Rancimat
Note
You can find the meaning of the symbols and columns in the
event overview at "Meaning of the symbols and columns in the
event overview", page 47.
2
Update view
￭ Click on the symbol or the menu item View ▶ Refresh to
view the current status of the log file.
3
Save log file
￭ Click on the symbol or the menu item File ▶ Save as….
￭ In the dialog window Save file as enter a file name and confirm
with [OK].
4
Open saved log file
￭ Click on the symbol
or the menu item File ▶ Open….
￭ In the dialog window Open, select the required file and confirm
with [OK].
Filtering entries in the event overview
Proceed as follows to filter the entries in the event file:
1
Filter the entries
￭ Click on the required filter criterion (e.g.: date = "30.08.2006").