Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index

■■■■■■■■■■■■■■■■■■■■■■
4 Operation
743 Rancimat
■■■■■■■■
39
2
Set automatic start time
■ Under Start heating select the option Daily.
■ Click on the button [Which days...].
The following dialog window appears:
■ Select the required day(s) and confirm with [OK].
■ Under Start at... enter the required time and confirm with [OK].
4.2.4 Gas flow control
The gas flow produced by the internal pump through the reaction ves-
sels to the measuring vessels can be switched on and off manually and
displayed in a separate window.
Switching the gas flow on and off
Proceed as follows:
1
Switch on
■ Click on the menu item Tools ▶ Gas flow control ▶ Gas flow
on.
2
Switch off
■ Click on the menu item Tools ▶ Gas flow control ▶ Gas flow
off.