Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index
4.2 Instrument and Program Settings
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
38
￭￭￭￭￭￭￭￭
743 Rancimat
Starting heating block A once automatically
Proceed as follows to automatically start the heating of block A at a spe-
cific time:
1
Open dialog window
￭ In the Control window, click on the menu item Tools ▶ Timer
function....
The following dialog window appears:
2
Set automatic start time
￭ Under Start heating select the option Once.
￭ Under Start at... enter the required time and date.
￭ Confirm the entries with [OK].
Starting heating block B daily automatically at the same
time
Proceed as follows to automatically start the heating of block B on a spe-
cific day of the week, at a specific time:
1
Open dialog window
￭ In the Control window, click on the menu item Tools ▶ Timer
function....
The following dialog window appears: