Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Operation
743 Rancimat
￭￭￭￭￭￭￭￭
37
Deleting a user
Proceed as follows to delete an existing user:
1
Open Users and groups manager
￭ In the Control window, click on the menu item
Options ▶ User permissions....
2
Delete user
￭ Right click on the user to be deleted to activate the menu item
Delete user.
￭ Confirm the message Do you really want to delete user
"user name"? with [Yes].
Deleting a group
Proceed as follows to delete an existing group:
1
Open Users and groups manager
￭ In the Control window, click on the menu item
Options ▶ User permissions....
2
Delete group
￭ Right click on the group to be deleted in order to select the menu
item Delete group.
￭ Confirm the message Do you really want to delete group
"group name"? with [Yes].
4.2.3 Timer
The function Timer can be used to start the two heating blocks A and B,
independently of one another, automatically and at a time specified by
you. The Rancimat has to be switched on and the software must be run-
ning.
Two different examples will explain how to program the timer.