Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index

4.1 Fundamentals of operation
■■■■■■■■■■■■■■■■■■■■■■
26
■■■■■■■■
743 Rancimat
An image of the Rancimat is shown in the Control panel, which can be
used for starting, displaying and stopping determinations.
The following information is shown in the status bar:
■ a short description of the menu item highlighted in the menu bar
■ the registered user
■ the instrument status
Menus
The Control window contains the following main menus:
File Create new methods, open existing methods,
manage methods, open Results window, print,
new login, close program.
View Activate/Deactivate toolbar and status bar, dis-
play instrument information, change live param-
eters, display status overview, display event log-
ging, select instrument.
Tools Manage cell constants, perform GLP tests, set
timer, set gas flow control, start all channels,
determine Delta T, record temperature, perform
service diagnosis.