Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index
4.1 Fundamentals of operation
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
24
￭￭￭￭￭￭￭￭
743 Rancimat
4 Operation
This section describes the most important points for operation of the 743
Rancimat.
You can find more detailed information in the Online help of the soft-
ware, which you can use to rapidly and easily call up the required informa-
tion everywhere, via [F1].
4.1 Fundamentals of operation
4.1.1 Starting and exiting the program
Proceed as follows to start and exit the program:
Note
If you are starting the program for the first time, you first have to set an
Administrator password (see Chapter 3.4.3, page 22).
1
Start program
￭ In the Windows Start menu under Pro-
grams ▶ Metrohm ▶ Rancimat, click on the menu item Ranci-
mat.
The following dialog window appears:
2
Log in
￭ Select the required User.
￭ Enter the Password and confirm with [OK].
3
Close program
￭ Click on the menu item File ▶ Exit or the symbol in the upper
right corner of the dialog window.