Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index

3.4 Connecting a PC
■■■■■■■■■■■■■■■■■■■■■■
22
■■■■■■■■
743 Rancimat
3.4.3 Carrying out basic settings
Setting the Administrator password
When starting the program for the first time, the Administrator password
must be set. Proceed as follows:
1
Switch on the instruments
■ Check whether the Rancimat is correctly connected to the PC (see
Chapter 3.4.1, page 19).
■ Switch on the Rancimat using the mains switch.
■ Switch on the PC.
2
Start program
■ In the Windows Start menu under Pro-
grams ▶ Metrohm ▶ Rancimat, click on the menu item Ranci-
mat.
The login window for the Administrator opens:
3
Set Administrator password
■ Do not enter a password, instead click on [OK].
■ Confirm the displayed message with [OK].
The following dialog window appears:
■ Leave the Old password field empty.
■ Enter a new password for the Administrator in the New pass-
word field.