Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
743 Rancimat
￭￭￭￭￭￭￭￭
21
5
Define the components of the program
￭ Click on the [Next >] button.
6
Define a target folder for the program icon
￭ Choose or enter the program folder of the Start menu in which
the program icon is to be inserted and confirm with [Next >].
The program will be installed.
7
Complete the installation
￭ Click on the [Finish] button after the successfully completed
installation.
The installation program will be exited.
3.4.2.3 Windows Vista
Caution
If you run the software 743 Rancimat on a computer with Windows
Vista, you need a special update in order to be able to display the help.
Due to licensing reasons you have to download this file from a Micro-
soft web page. On the installation CD the link "Download Win-
Help.url" to the corresponding Microsoft web page can be found in
the folder "Vista Update for HLP help". Download the necessary
installation file and save it.
Proceed as follows to install the update:
1
￭ Exit 743 Rancimat if you have started the software after the instal-
lation.
￭ Start the installation file by double-clicking and follow the instruc-
tions of the installation program.