Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index
4.7 Results
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
138
￭￭￭￭￭￭￭￭
743 Rancimat
"Results" tab
On the Results tab, you can carry out the settings for the result output.
Output of the following results on the reports:
Induction time
on | off (Default value: on)
Stability time
on | off (Default value: off)
Formula 1 for induction time
on | off (Default value: off)
Formula 2 for stability time
on | off (Default value: off)
Formula 3 for stability time
on | off (Default value: off)
Standard time
on | off (Default value: off)
"Scaling" tab
On the Scaling tab, you can carry out the settings for scaling the curve
axes.