Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Operation
743 Rancimat
￭￭￭￭￭￭￭￭
131
￭ Select the option Determination according to method and
confirm with [Print].
The dialog window Print appears.
4
Print report
￭ Select the required printer and click on [Print].
The report will be printed.
Printing the report defined under "Settings"
Proceed as follows to print the report of one or several determinations,
which has been defined under Settings:
1
Display determination overview
￭ See "Displaying the determination overview", page 87.
2
Select determination
￭ Select the determination of which the report is to be printed (see
"Selecting determinations", page 90).
3
Select data
￭ Click on the symbol
or the menu item File ▶ Print....
The dialog window Printing of... appears.
￭ Select the option Determination according to settings.
4
Carry out settings
￭ Click on the [Settings] button.
The dialog window Program settings appears.
￭ Carry out the required settings (see tab "Report settings", page
136) and confirm with [OK].
The dialog window Printing of... appears.
5
Print report
￭ Click on the [Print] button.
The dialog window Print appears.
￭ Select the required printer and click on [Print].
The report will be printed.