Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index
4.7 Results
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
124
￭￭￭￭￭￭￭￭
743 Rancimat
￭ Under Formula according to... and Formula parameters,
enter the required values and confirm with [OK].
Note
A detailed description of the parameters can be found at "Recalcu-
late standard time", page 127.
Parameter description
Recalculate induction time
on | off (Default value: off)
Activate/Deactivate recalculation of the induction time. If the recalculation
is deactivated, the original result is kept.
Calculation active
on | off (Default value: on)
If this option is activated, the parameters can be re-entered for the calcu-
lation of the induction time.
If this option is deactivated, the original result is deleted.
Evaluation delay
Waiting time until starting the curve evaluation.