Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Operation
743 Rancimat
￭￭￭￭￭￭￭￭
123
Recalculating formulas
Proceed as follows to recalculate the results of the formulas:
1
Open dialog window
￭ Select the determination which is to be recalculated (see "Select-
ing determinations", page 90).
￭ Click on the menu item Determination ▶ Recalculation.
The dialog window Recalculation appears.
￭ Click on the tab Formulas.
2
Adjust the parameters
￭ Activate the options Recalculate formula 1 for induction
time and Calculation active.
or
Activate the options Recalculate formula 2 for stability time
and Calculation active.
or
Activate the options Recalculate formula 3 for stability time
and Calculation active.
￭ Re-enter the parameters for the formula and confirm with [OK].
Note
A detailed description of the parameters can be found at "Recalcu-
late formula 1 for induction time", page 126.
Recalculating the standard time
Proceed as follows to recalculate the standard time:
1
Open dialog window
￭ Select the determination which is to be recalculated (see "Select-
ing determinations", page 90).
￭ Click on the menu item Determination ▶ Recalculation.
The dialog window Recalculation appears.
￭ Click on the tab Standards.
2
Adjust the parameters
￭ Activate the options Recalculate standard time and Calcula-
tion active.