Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index

4.7 Results
■■■■■■■■■■■■■■■■■■■■■■
110
■■■■■■■■
743 Rancimat
AOM: Formula calculation according to standard AOM with Target tem-
perature = 97.8 °C.
free: Formula calculation with freely selectable Target temperature.
Formula parameters
Factor
Parameter for the calculation of the standard time. It indicates by which
factor the time changes per 10 °C.
Target temperature
Target temperature for the calculation of the standard time.
Time axis (x)
Autoscaling
Automatic definition of the start and end value of the time axis.
Manual scaling
Manual definition of the end value of the time axis.
End value
End value of the time axis with manual scaling.
Conductivity axis (y)
Autoscaling
Automatic definition of the start and end value of the conductivity axis.
Manual scaling
Manual definition of the end value of the conductivity axis.
End value
End value of the conductivity axis with manual scaling.