Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index

■■■■■■■■■■■■■■■■■■■■■■
4 Operation
743 Rancimat
■■■■■■■■
109
Formula 1 for induction time
The automatically determined induction time was calculated with these
values and saved under the name shown in the field "R1".
Formula 2 for stability time
The automatically determined stability time was calculated with these val-
ues and saved under the name shown in the field "R2".
Formula 3 for stability time
The automatically determined stability time was calculated with these val-
ues and saved under the name shown in the field "R3".
Calculation of standard time
Indicates whether the standard time has been calculated or not.
Formula according to...
AOCS Cd12b-92: Formula calculation according to standard AOCS
Cd12b-92 with Target temperature = 110 °C.