Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index
4.7 Results
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
108
￭￭￭￭￭￭￭￭
743 Rancimat
Evaluate induction time
The induction time has been automatically determined (see "Induction
time", page 66).
Evaluate stability time
The stability time has been automatically determined (see "Stability time",
page 67).
Delta Kappa
Conductivity change for the determination of the stability time.
Options for induction time
Evaluation delay
Waiting time until starting the curve evaluation.
Evaluation suppression
Start
Time from the start of the determination to the start of the evaluation
suppression.
End
Time from the start of the determination to the end of the evaluation sup-
pression.
Evaluation sensitivity
Evaluation sensitivity used for the determation of the induction time.