Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index

■■■■■■■■■■■■■■■■■■■■■■
4 Operation
743 Rancimat
■■■■■■■■
105
Display of the instrument, block and channel on which the determination
was carried out.
Induction time automatic
Automatically determined induction time.
Induction time manual
Induction time manually determined with the reevaluation.
Stability time
Automatically or, with the reevaluation, manually determined stability
time.
Delta Kappa
Conductivity change for the determination of the stability time.
Formula 1 for induction time
Result of the calculation with formula 1.
Formula 2 for stability time
Result of the calculation with formula 2.
Formula 3 for stability time
Result of the calculation with formula 3.