Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index
4.7 Results
■■■■■■■■■■■■■■■■■■■■■■
96
■■■■■■■■
743 Rancimat
Send to file
Directory in which the determination file (TXT file) has been saved.
Evaluation sensitivity
Evaluation sensitivity used for the determation of the induction time.
User
Name of the user who was logged in when recording the determination.
Determination date
Date and time at which the determination was started.
Block
Letter of the block used for the determination.
Delta Kappa
Conductivity change for the determination of the stability time.
Formula 1 for induction time
Result of the calculation with formula 1.
Formula 2 for stability time
Result of the calculation with formula 2.
Formula 3 for stability time
Result of the calculation with formula 3.
Gas flow
Gas flow through sample.
Unit
Number of the instrument used for the determination.
ID 1
Sample identification 1.
ID 2
Sample identification 2.
Induction time automatic
Automatically determined induction time.
Induction time manual
Induction time manually determined with the reevaluation.