Owner's manual
Table Of Contents
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 4 Operation
- 4.1 Fundamentals of operation
- 4.2 Instrument and Program Settings
- 4.3 Program information
- 4.4 Calibration functions
- 4.5 Methods
- 4.6 Determinations
- 4.6.1 Preparing samples
- 4.6.2 Preparing the instrument and the accessories
- 4.6.3 Preparing the determination
- 4.6.4 Starting the determination
- 4.6.5 Cleaning the instrument and accessories
- 4.6.6 Adjusting the method parameters during the determination
- 4.6.7 Stopping the determination manually
- 4.6.8 Status of the live curve
- 4.7 Results
- 4.8 GLP functions
- 5 Handling and maintenance
- 6 Troubleshooting
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index
4.7 Results
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
94
￭￭￭￭￭￭￭￭
743 Rancimat
The two fields are displayed in the lower part of the window under
Field:
3
Specify the filter criteria
￭ In the column determination date in field Criteria enter the
value 05.04.2000* (incl. asterisk as wildcard).
￭ In the column Temperature and the field Criteria enter the
value > 110.
Note
You will find a detailed description of the possible filter criteria
under "Criteria", page 102.
4
Apply and remove the filter
￭ Click on the symbol
or the menu item Determination ▶ Fil-
ter ▶ Apply filter/sorting.
In the window Determination data, all determination data is
now displayed that was carried out on April 5, 2000 at a temper-
ature of over 110 °C. In addition, the dialog window Determina-
tion data uses the word FILTER to indicate that the displayed
data is filtered.
￭ Click on the symbol
or the menu item Determination ▶ Fil-
ter ▶ Remove filter/sorting.
The special filter has been removed again.