User guide

6.3 Analog output
732 IC Detector / 733 IC Separation Center
187
6.3 Analog output
For the attachment of recorders or integration systems, the 732 IC De-
tector offers the two analog outputs 1111 (0…1 V) and 1212 (0…10 mV)
(see section 3). The attachment of these instruments is described in
detail in section 2.9. The polarity of the output signal at the analog out-
put sockets can always be switched under the <PARAM> key (see
section 4.5.1). The circuit of the two analog outputs has the following
appearance:
732 IC Detector Connection Function
+
-
OP-07
100Ω
22kΩ
1.47kΩ
237Ω
1 V (red)
0 V (black)
10 mV (red)
0 V (black)
Analog output 0……1 V
Analog output 0……10 mV
6.4 External power supply for
733 IC Separation Center
If the 733 IC Separation Center is operated without the 732 IC Detector,
an external power supply must be attached to connection 4848 "External
Power". Power supply and connecting cable must comply with the fol-
lowing conditions:
"External Power" socket Function
1
4
5
3
6
7
2
1 +5 V DC / 0.5 A
2 not assigned
3 +24 V DC / 2 A
4 0 V (digital) *
5 0 V (analog) *
6 Ground
7 Ground
* Pin 4 and pin 5 must
be connected in the
vicinity of the power
source ("zero point of
star")