User guide

1.2 Parts and controls
732 IC Detector / 733 IC Separation Center
7
2929 Opening for detector cable B
opening for connecting cable
detector block B – 732
3939 Detachable rear panel
access to bottom part of inner
compartment
3030 Opening for outlet capillary B
discharge of the eluent of column B to
waste
4040 Opening for inlet capillary A
supply of the eluent for column A
3131 Rear panel opening
(closed with plastic stopper) for
additional supply and discharge lines
to and from the inner compartment
4141 Rear panel opening
(closed with plastic stopper) for
additional supply and discharge lines
to and from the inner compartment
3232 Opening for outlet capillary A
discharge of the eluent of column A to
waste
4242 Connection for drain tube
for discharge of spilled liquid from the
inner compartment
3333 Opening for detector cable A
opening for connecting cable
detector block A – 732
4343 Rear panel opening
(closed with plastic stopper) for
additional supply and discharge lines
to and from the inner compartment
3434 Knurled screw
for fastening the rear panel 3535
4444 Opening for inlet capillary B
supply of the eluent for column B
3535 Detachable rear panel
access to top part of the inner
compartment
4545 Connection for 732 IC Detector B
3636 Connection for 732 IC Detector A 4646 Terminal block for valve B
Ground, Fill, Inject:
inputs for control of the valve
Pos.Fill:
output signal on switching of the
valve to position "FILL"
Integr.Start:
output signal on switching of the
valve to position "INJECT"
3737 Knurled screw
for fastening rear panel 3939
4747 Model plate
with serial number
3838 Terminal block for valve A
Ground, Fill, Inject:
inputs for control of the valve
Pos.Fill:
output signal on switching of the
valve to position "FILL"
Integr.Start:
output signal on switching of the
valve to position "INJECT"
4848 Connection for external supply
connection of power supply unit
(5 V, 0.5 A / 24 V, 2 A) in operation
without 732 IC Detector