User guide

4.7 Programming
732 IC Detector / 733 IC Separation Center
113
>PROGRAM/edit. XXX.X min
Pmax: --- MPa
---, 0.1…50 MPa
Reset maximum shutoff pressure
This inquiry appears only with "SETUP/peripherals/operation
with 709 = on".
The maximum shutoff pressure for automatic shutoff of
the 709 IC Pump is set to the inputted value (for further
details of the parameter "Pmax", see section 4.5.1).
>PROGRAM/edit. XXX.X min
Pmin: --- MPa
---, 0.0…50 MPa
Reset minimum shutoff pressure
This inquiry appears only with "SETUP/peripherals/operation
with 709 = on".
The minimum shutoff pressure for the automatic shutoff
of the 709 IC Pump is set to the inputted value (for
further details of the parameter "Pmin", see sec-
tion 4.5.1).
>PROGRAM
>PROGRAM/delete all
Delete all program steps
>PROGRAM/delete all
delete all?
<ENTER>, <QUIT>
Confirm deletion of all program steps
<ENTER> All program steps of the program will be
deleted.
<QUIT> Abort of the deletion operation.