User Manual

3.1 BasicBasic settings
726 Titroprocessor, Instructions for use
3434
Date System date in format YYYY-MM-DD
Time System time in format hh:mm:ss
Settings for determination files:
Each determination is automatically allocated a file name . There are various
ways of creating this file name. Combinations of determination time/date,
run number, sample identification and/or a particular standard text can be
defined.
Standard
data file name Standard text, which can be used for automatically
naming determination files. The file names are
produced automatically under file name type during
the determination according to the given mask.
file name type Mask for the automatic creation of file names for
determination files. The selection list:
<stand.>###.dtm standard+run number
<standard>.dtm only standard file name
<standard>.### standard+run number
<YYMMDDhh>.### date+ run number
<ident1>.### sample identification+
run number
<ident1>.dtm only sample identification
YYMMDDhh.mms date+time
Example:
Standard file name = 'DATA'
Run number = 005
<stand.>###.dtm
à à produces the file name: DATA005.dtm
The subsequent determinations in the same series
of samples are given the file names DATA006.dtm,
DATA007.dtm etc.
Please note that only the combination Date+Time
guarantees that a particular file name can never be
used twice.
File
comment type Mask for automatic creation of file comments for
determination files.
The selection list:
off no file comment
Remark only sample remark
Ident1+Meth sample identification+
method name
Ident1,2+Meth sample identification+
method name