User Manual

8. Command reference8. Command reference
726 Titroprocessor, Instructions for use
205205
8.13.4 Other communication commands
Further communication commands are available for special applications.
PRINT Print out text line
The PRINT command prints out a single line on the printer defined in the
configuration.
Command Parameters Parameters
ÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
PRINT
Parameter Text line
up to 50 characters
Any letters, numbers and special characters can be en-
tered.
KEYCTRL Switch key remote control mode on/off
In order to allow the remote control of the 726 Titroprocessor by a computer
it is possible to switch the communication mode of an RS 232 interface to
the key simulation mode KEYCTRL during a method run. In this mode the
Titroprocessor keyboard is blocked. The instrument can only be operated
via the RS 232 interface.
Command Parameters Parameters
ÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
KEYCTRL State off