User Manual

1.4 The keyboard
726 Titroprocessor, Instructions for use
88
1.4.3 Action keys
NEXTDELAYSKIP
START
STOP
HOLD
CONT
The action key have an immediate effect on the course of a method. The
<START> key starts a method; the <STOP> key ends it. The <HOLD /
CONT> key can be used to interrupt a method or to resume it.
If the <Shift> key is pressed at the same time as an action key the proc-
essing of a series of samples can be controlled directly (with Autostart 'on').
<Shift><START> (=NEXT) ends the processing of the current sample and
starts processing the next sample in the series.
<Shift><STOP> (=DELAY) stops the sample series after the current sam-
ple has been processed.
<Shift><HOLD> (=SKIP) ends the execution of the current command and
jumps to the next command line of the loaded method.
1.4.4 Manual printing
LINE
FEED
PRINT
STOP FORM
PRINT
SCREEN
The built-in A4 thermal printer or any other connected printer can be oper-
ated manually with the yellow printer keys.
The <PRINT><PRINT> key opens the printer menu where the type of report can be
selected. Global reports and determination reports (if a determination report
is present in the working menu) can be selected.
<Shift><PRINT> (= STOP PRINT) interrupts a printout immediately.
<LINE FEED> executes a line feed on the connected printer.
<Shift><LINE FEED> (= FORM FEED) executes a form feed on the con-
nected printer.
<PRINT SCREEN> prints the current screen contents.
1.4.5 Navigation and editing keys
QUIT
The <QUIT> <QUIT> key closes an editing field, a window or a dialog page and
accepts previous parameter modifications. The dialog switches to the next
higher level.
<INS> (= Insert) switches the insert mode on/off for editing an entry
<<DEL> (= Delete) deletes the character to the right of the cursor position
<Shift><DEL> deletes a complete editing field.
<HOME> places the cursor on the first editing field of a dialog window (in
navigation mode).
<END> places the cursor on the last sample silo line or command line (in
method editor).